Browsing by Title
Now showing items 5368-5387 of 15800
-
Fabrication and characterization of a coplanar nickel-metal hydride microbattery equipped with a gel electrolyte
(Elsevier BV, 2019-02-28)The growing utilization of portable and autonomous micro devices results in a need for novel integrated power supplies with low power densities and energy contents. We report on a rechargeable thin-film microbattery which ... -
Fabrication and DC characterization of single electron transistors at low temperature
(2007-08-02)The metallic single electron transistor (SET) has been shown to provide charge sensitivity on the order of 10-6 e/(Hz)1/2, when operated as a charge amplifier. This makes it an ideal candidate for low-noise measurement ... -
Fabrication and Modeling of Multimode Fiber Lenses
(2016-03-07)We report on the fabrication, modeling, and experimental verification of the emission of fiber lenses fabricated on multimode fibers in different media. Concave fiber lenses with a radius of 150 μm were fabricated onto a ... -
Fabrication and Optimization of Organic FET and Organic Electrolyte Gated FET Devices for Applications as Label-free Biosensors
Organic Thin-Film Transistors are carbon-based semiconductor devices. Their simple fabrication makes them an ideal candidate for disposable, wearable technologies; an implementation being aptamer-based biosensors. This ... -
Fabrication and Properties of Bi1/2Na1/2TiO3 Based Ferroelectric Ceramics with Low Levels of B-site Additives
(2008-10-09)Three different B-site additives, Mg1/3Nb2/3, Zr4+, and Cu1/2W1/2, were added to BNT ceramics in varying concentrations. These were abbreviated as BNMN, BNZ, and BNCW, respectively. The compositions were calcined to form ... -
Fabrication and Study of AC Electro-Osmotic Micropumps
(2013-05-07)In this thesis, microelectrode arrays of micropumps have been designed, fabricated and characterized for transporting microfluid by AC electro-osmosis (ACEO). In particular, the 3D stepped electrode design which shows ... -
Fabrication of a Bioactive Scaffold Material for Meniscus Tissue Engineering
(2013-11-20)Injuries to the meniscus are a common and important source of mobility issues in the knees of young active individuals, as well as elderly individuals. Conventional treatments for these injuries involve surgical resections ... -
Fabrication of novel power sources for portable and wearable devices
Practical applications of portable and wearable electronics is linked with the development of power sources that address the physical requirements of these electronic devices, such as flexibility and a small footprint. In ... -
Fabrication of planar heterojunction CsPbBr2I perovskite solar cells using ZnO as an electron transport layer and improved solar energy conversion efficiency
(RSC, 2018-06-26)Inorganic lead halide perovskite solar cells with mixed halides have achieved reasonable power conversion efficiency with the advantage of an enhanced stability. In this work, we report the fabrication of an all inorganic ... -
Fabrication, Characterization, and Irradiation of an Austenitic Oxide Dispersion Strengthened Steel Suited for Next Generation Nuclear Applications
As nuclear energy systems become more advanced, the materials encompassing them need to perform at higher temperatures for longer periods of time. In this Master’s thesis we experiment with an oxide dispersion strengthened ... -
Fabrication, Photoluminescence, and Electrical Measurements of Molybdenum DiSulphide Films and Heterostructures
Transition-metal dichalcogenides (TMDs) exhibit unique optical and electronic properties that make them highly appealing to the scientific community. Like graphene, they have strong in-plane bonds allowing for easy fabrication ... -
A Fabry-Perot Refractometer for Chemical Vapor Sensing by Solid-Phase Microextraction
(2016-03-14)The contour lithography method [1] is used to improve the fabrication yield of previously demonstrated [2] microfluidic Fabry-Perot (FP) refractive index (RI) sensors. The sensors are then coated with polydimethylsiloxane ... -
Fac vs Mer Selection in Octahedral Complexes of the N‑Benzyl- Substituted Triazolylpyridine Diad with Labile Metal Ions (Zinc(II), Iron(II), and Nickel(II))
(American Chemical Society, 2018-02-08)Pseudo-octahedral complexes built on chelating ligands offer valuable isomeric properties such as the formation of fac vs mer isomers, and lambda vs delta enantiomers. This article discusses factors guiding the fac vs mer ... -
Faces of the Courtroom: How the Visual Elements of Portraiture Contribute to the Construction and Communication of Courtroom Sketches
The purpose of this study is to interrogate the composition and influence of courtroom sketches from an art historical perspective with the aim of demonstrating not only their importance in the public’s understanding of ... -
Facies Architecture and Stratigraphy of Tidal Ridges in the Eocene Roda Formation, Northern Spain
(2011-05-02)ABSTRACT The Eocene Roda Formation in northern Spain documents the deposits from a range of coastal depositional environments. These include alluvial plains, distributary channels, mouth bars, upper to lower-shorefaces, ... -
Facilitating Transfers Applied to Practice
(2012-11-09) -
The Facing-the-Viewer Bias in the Perception of Depth Ambiguous Human Figures
(2013-08-13)Orthographically-projected biological motion point-light displays generally contain no information about their in-depth orientation, yet observers consistently prefer the facing-the-viewer (FTV) interpretation (Vanrie, ... -
Facteurs déterminant le recours à l'aide financière chez les jeunes des Premières Nations / préparé pour la Fondation canadienne des bourses d'études du millénaire par R.A. Malatest & Associates Ltd. et le professeur Blair Stonechild.
(Ottawa, Ont. : Fondation canadienne des bourses d'études du millénaire,, 2008-09-15) -
The faction detected and despised
(1810)