Show simple item record

dc.contributor.authorCleveland, Daniel
dc.contributor.otherQueen's University (Kingston, Ont.). Theses (Queen's University (Kingston, Ont.))en
dc.date.accessioned2017-11-02T19:45:55Z
dc.date.available2017-11-02T19:45:55Z
dc.identifier.urihttp://hdl.handle.net/1974/23630
dc.description.abstractHaptic simulation systems allow human users to kinesthetically interact with virtual environment models through a robotic mechanism known as a haptic interface. The sampled-data nature of haptic interfaces limits the range of virtual environment dynamics that can be stably rendered in a haptic simulation system which limits the available performance of haptic systems. A method of increasing the range of stably implementable virtual environment dynamics, and the focus of this thesis, is through the investigation of different discrete virtual environment implementations. The passivity and uncoupled stability criteria are considered the most stringent conditions on the stability of haptic simulations systems. In this thesis, seven different discretizations of a spring-damper virtual environment are derived and studied using the passivity and uncoupled stability criteria. Traditionally, position-sampling is the method by which feedback is acquired from a haptic system, however, in this thesis the effects of sampling velocity and that of sampling both position and velocity are studied. As well, a single degree-of-freedom haptic device was developed with analog circuitry to implement velocity-sampled and position and velocity-sampled haptic simulation systems. Results indicate that a zero-order-hold position-sampled implementation may provide a larger range of implementable dynamics than the benchmark, backward difference. It was found that the sampled-PV implementation shows great potential to increase the range of implementable dynamics over existing position-sampled implementations.en_US
dc.language.isoenen_US
dc.relation.ispartofseriesCanadian thesesen
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 United States*
dc.rightsQueen's University's Thesis/Dissertation Non-Exclusive License for Deposit to QSpace and Library and Archives Canadaen
dc.rightsProQuest PhD and Master's Theses International Dissemination Agreementen
dc.rightsIntellectual Property Guidelines at Queen's Universityen
dc.rightsCopying and Preserving Your Thesisen
dc.rightsThis publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner.en
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/*
dc.subjectHapticen_US
dc.subjectControlen_US
dc.subjectDigitalen_US
dc.titleDigital Control Techniques for High Fidelity Haptic Simulation Systemsen_US
dc.typeThesisen
dc.description.degreeMaster of Applied Scienceen_US
dc.contributor.supervisorHashtrudi-Zaad, Keyvan
dc.contributor.departmentElectrical and Computer Engineeringen_US


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 United States
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 3.0 United States