Show simple item record

dc.contributor.authorYounes, Georges
dc.contributor.otherQueen's University (Kingston, Ont.). Theses (Queen's University (Kingston, Ont.))en
dc.date.accessioned2018-04-27T15:20:32Z
dc.date.available2018-04-27T15:20:32Z
dc.identifier.urihttp://hdl.handle.net/1974/24058
dc.description.abstractOil sands mining operations in Canada produce large volumes of waste tailings that are difficult to dewater using commercial polyacrylamide-based flocculants. Recently, a novel hydrolytically-degradable polymer was synthesized through micellar radical polymerization of short-chain polyester cationic macromonomers. Poly(PCL2ChMA), made of polycaprolactone choline iodide ester methacrylate with two polyester units, effectively treated mature fine tailings (MFT) solutions as evaluated by measuring initial settling rate, supernatant turbidity, and capillary suction time (CST) of the sediments. Moreover, the novel materials become more hydrophobic with time, leading to an 85% reduction in CST after accelerated degradation for one week at 85 °C. The achievements described in this follow-up work are twofold. First, a procedure was developed to directly measure the extent of sediment dewatering that results from the polymer degradation, as previously the performance was indirectly inferred through CST measurements. Second, an investigation of the relationship between macromonomer structure and the performance of the polymer flocculant has led to the development of an improved material. Neither the substitution of PCL with poly(lactic acid) (PLA) units or replacement of the methacrylate functionality with acrylate greatly affects the ability of the resulting cationic flocculants to settle and separate the sediments in diluted MFT solutions because the synthesized polymers had similar charge densities and molecular weights. However, the faster degradation rates of the PLA-based materials lead to significantly faster dewatering of the sediments. 50% compaction was observed in PLA-polymer flocculated samples held for 5 days at 50 °C, whereas it was necessary to increase the temperature to 85 °C to achieve the same dewatering with the PCL-polymer flocculated samples. As a comparison, it was found that dewatering did not occur when the MFT material was flocculated with a non-degradable cationic polymer, non-ionic PAM, and commercial anionic FLOPAM A3338. A similar 50% compaction occurs in MFT sediments flocculated with LA-based polymers held at room temperature over several weeks, indicating that these materials degrade at a fast enough rate to provide solids compaction under field conditions.en_US
dc.language.isoenen_US
dc.relation.ispartofseriesCanadian thesesen
dc.rightsQueen's University's Thesis/Dissertation Non-Exclusive License for Deposit to QSpace and Library and Archives Canadaen
dc.rightsProQuest PhD and Master's Theses International Dissemination Agreementen
dc.rightsIntellectual Property Guidelines at Queen's Universityen
dc.rightsCopying and Preserving Your Thesisen
dc.rightsThis publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner.en
dc.subjectBiodegradable Polymersen_US
dc.subjectMature Fine Tailingsen_US
dc.subjectFlocculationen_US
dc.subjectSediments Dewateringen_US
dc.subjectSediments Consolidationen_US
dc.titleHydrolytically Degradable Cationic Flocculants For Improved Water Recovery From Mature Fine Tailingsen_US
dc.typeThesisen
dc.description.degreeMaster of Applied Scienceen_US
dc.contributor.supervisorHutchinson, Robin A. Jr
dc.contributor.departmentChemical Engineeringen_US
dc.embargo.termsI don't want to restrict my thesisen_US
dc.embargo.liftdate2018-04-26


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record