Show simple item record

dc.contributor.authorLaurenzi, Michaelen
dc.description.abstractCircularly Polarized (CP) antennas are crucial elements in wireless communications, and for geospatial applications such as Global Navigational Satellite Systems (GNSS), their Right-Hand Circular Polarization (RHCP) is an essential property. External feeding networks are responsible for the CP of many antennas, whose function is to excite two orthogonal modes (specific to that antenna) in quadrature phase – but the method at which this is achieved ultimately depends on the type of antenna. Two examples of specific feeding networks are: a) 4-port antennas (i.e. Dielectric Resonator Antennas (DRAs) and Printed Quadrifilar Helical Antennas (PQHAs)) that require an incremental 90° phase delay fed to each port, and b) intrinsically Linearly Polarized (LP) antennas arrays that are fed in relative quadrature phase to their single ports (i.e. 2x2 array of sequentially rotated microstrip patch antennas). This thesis explores the use of Low Temperature Co-fired Ceramics (LTCC) to highly miniaturize the aforementioned antenna feeding networks into System-on-Package (SoP) solutions with Surface-Mount Technology (SMT) and full 3-D shield features for GNSS frequencies. LTCC technology offers the advantages of reimagining common lumped-element circuits based on passive Surface-Mount Devices (SMDs) as extremely compact multi-layer structures. Quadrature phase and signal division respective to each feeding network is realized as the combination of various multi-layer lumped-element power splitters and 90°/180° hybrid couplers. In addition, stand-alone chips or dies of each circuit are presented, complementing this thesis as commercially viable products suitable for wideband or dual-band applications over the GNSS spectrum. All circuits were fabricated using 14-layers of FerroA6M LTCC substrate with an 𝜀𝑟= 5.7, tan𝛿=0.001, (from 1-2GHz) and a homogenous layer thickness of 90μm. Simulations were conducted with ANSYS’ High Frequency Structure Simulator (HFSS®) and Keysight’s Advanced Design System (ADS®) which are in good agreement with measurements.en
dc.relation.ispartofseriesCanadian thesesen
dc.rightsQueen's University's Thesis/Dissertation Non-Exclusive License for Deposit to QSpace and Library and Archives Canadaen
dc.rightsProQuest PhD and Master's Theses International Dissemination Agreementen
dc.rightsIntellectual Property Guidelines at Queen's Universityen
dc.rightsCopying and Preserving Your Thesisen
dc.rightsThis publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner.en
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 United States*
dc.subjectFeeding Networken
dc.subject180 Degree Coupleren
dc.subject90 Degree Coupleren
dc.subjectDual-Band Power Splitteren
dc.titleMiniaturized GNSS Antenna Feeding Networks Using Multi-Layer LTCC Technologyen
dc.contributor.supervisorFreundorfer, Alois
dc.contributor.supervisorAntar, Yahia
dc.contributor.departmentElectrical and Computer Engineeringen's University at Kingstonen

Files in this item


This item appears in the following Collection(s)

Show simple item record

Queen's University's Thesis/Dissertation Non-Exclusive License for Deposit to QSpace and Library and Archives Canada
Except where otherwise noted, this item's license is described as Queen's University's Thesis/Dissertation Non-Exclusive License for Deposit to QSpace and Library and Archives Canada