Characterizing Organic Coatings on Renaissance Bronzes with Short-Wave Infrared and Mid-Infrared Spectroscopy

Loading...
Thumbnail Image

Authors

Provost, Elizabeth

Date

2025-08-25

Type

thesis

Language

eng

Keyword

spectroscopy , bronze , sculpture , Renaissance , FORS , ER-FTIR , non-destructive

Research Projects

Organizational Units

Journal Issue

Alternative Title

Abstract

This thesis investigates the historical composition, application, and identification of surface organic coatings (SOCs) used on small Renaissance bronze sculptures. During the Renaissance, sculptors and founders employed oil- and resin-based coatings to enhance the visual and physical properties of bronzes, producing dark, lustrous surfaces that were both aesthetic and protective. While these coatings were central to workshop practice, their material composition remains difficult to reconstruct due to limited historical documentation, degradation over time, and the practical constraints of non-invasive analysis on museum objects. To address these challenges, this research developed a reproducible protocol for characterizing SOCs using non-destructive techniques—specifically external reflection Fourier transform infrared spectroscopy (ER-FTIR) and fibre optic reflectance spectroscopy (FORS)—across the visible/near-infrared (VIS-NIR, ~400–1000 nm), short-wave infrared (SWIR, ~1000–2500 nm), and mid-infrared (MIR, ~2.5–25 μm) ranges. Twenty-six reference mixtures were prepared using historic materials: linseed oil, walnut oil, mastic resin, pine resin, and bitumen. These were heat-treated (“stoved”) onto prepared metal coupons to replicate the hard, insoluble coatings historically used. Artificial ageing was then applied to simulate long-term oxidation and polymerization. A spectral reference database was developed by analyzing coatings at each stage—raw, stoved, and aged—using ER-FTIR, FORS, and, selectively, pyrolysis gas chromatography–mass spectrometry (Py-GC-MS) to validate spectral interpretations. Key spectral features were identified for each material and blend. Additionally, the application of wax and shellac was explored, and unique ER-FTIR and FORS markers were determined for the identification of non-original re-coatings. This protocol was applied in situ to small bronzes from the Royal Ontario Museum: Venus after the Bath, Lion Attacking Bull, and St. Jerome. These case studies revealed that, used in tandem, ER-FTIR and FORS can narrow down plausible compositions and detect significant modifications or additions, such as waxes or resins. In all three objects, results pointed toward complex coatings composed of drying oils blended with natural resins, along with later additions of wax. Overall, this research demonstrates that the combined use of ER-FTIR and FORS, supported by a reference library, can offer meaningful insights into the composition and condition of SOCs.

Description

Citation

Publisher

License

Queen's University's Thesis/Dissertation Non-Exclusive License for Deposit to QSpace and Library and Archives Canada
Intellectual Property Guidelines at Queen's University
Copying and Preserving Your Thesis
This publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner.
Attribution-NonCommercial-NoDerivatives 4.0 International

Journal

Volume

Issue

PubMed ID

External DOI

ISSN

EISSN