Hydrogen Fluoride Capture and Mechanisms of Adsorption by Smelter Grade Alumina at Elevated Temperature

dc.contributor.authorBaxter, Roberten
dc.contributor.departmentMining Engineeringen
dc.contributor.supervisorDavis, Boyd
dc.contributor.supervisorPickles, Christopher
dc.date.accessioned2021-10-13T21:24:23Z
dc.date.available2021-10-13T21:24:23Z
dc.degree.grantorQueen's University at Kingstonen
dc.description.abstractAluminum metal is produced industrially by electrolysis of Smelter Grade Alumina (SGA) in a molten electrolyte using the well-known Hall-Héroult process. Water and structural hydroxyls associated with the SGA, and moisture from ambient air drawn into the electrolytic cell, hydrolyze the fluorides present in the electrolysis cell to produce HF gas. HF emissions from electrolytic cells are dry adsorbed (captured) onto the surface of primary alumina via a Dry Scrubbing System (DSS) followed by the subsequent recycle of the alumina, containing the adsorbed fluorides (secondary alumina), back to the electrolytic cell as feed material for the smelting process. Emission compliance is achieved by limiting the off-gas temperature entering the DSS to sustain an acceptable adsorption efficiency. This practice increases the moisture loading to the cell; hence, conventional DSS technology and operating practices promote, not abate, HF formation. This research thesis focused on understanding better the adsorption and retention of HF by alumina at both conventional and elevated temperatures. The goals were to minimize or eliminate the conflict associated with current operating practices, and to increase the alumina quality entering the electrolysis cell. Scientific observations and new discoveries from this investigation provided insight into resolving this conflict, specifically: i. regardless of the capture temperature, HF capture capacity increased directly with the number of accessible SGA pore reaction sites. ii. HF retention capability increased directly with capture temperature, number of accessible hydrate-free reaction sites, and the formation of stable fluoride species. iii. principle mechanisms for HF capture included hydrogen bonding (for initial capture) followed by progressive chemisorption, provided sufficient activation energy was available. iv. principle mechanisms for HF loss included the progressive release of hydrogen bonds above 200 °C in conjunction with hydrolysis of chemisorbed fluorides above 300 °C. v. gibbsite soak calcined at a temperature between 250 °C and 300 °C, before reacting with HF, provided the optimal HF capture capacity and retention capability. HF capture at elevated temperature, when coupled with increased accessible pore specific surface area, has the potential to reduce HF emissions to the environment, and increase the alumina quality entering the electrolysis cell.en
dc.description.degreePhDen
dc.embargo.liftdate2026-10-13T17:53:20Z
dc.embargo.termsThe thesis contains discoveries that are subject to an ongoing IP filing.en
dc.identifier.urihttp://hdl.handle.net/1974/29492
dc.language.isoengen
dc.relation.ispartofseriesCanadian thesesen
dc.rightsQueen's University's Thesis/Dissertation Non-Exclusive License for Deposit to QSpace and Library and Archives Canadaen
dc.rightsProQuest PhD and Master's Theses International Dissemination Agreementen
dc.rightsIntellectual Property Guidelines at Queen's Universityen
dc.rightsCopying and Preserving Your Thesisen
dc.rightsThis publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner.en
dc.subjectHydrogen Fluorideen
dc.subjectSmelter Grade Aluminaen
dc.subjectRetention Mechanismsen
dc.subjectAluminum Electrolysisen
dc.subjectHF Adsorptionen
dc.subjectElevated Temperatureen
dc.subjectStructural Hydroxylsen
dc.titleHydrogen Fluoride Capture and Mechanisms of Adsorption by Smelter Grade Alumina at Elevated Temperatureen
dc.typethesisen
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
Baxter_Robert_F_202110_PHD.pdf.pdf
Size:
88.61 MB
Format:
Adobe Portable Document Format
Description:
PhD Thesis Document - Robert F Baxter
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.25 KB
Format:
Item-specific license agreed upon to submission
Description: