Natural Convective Heat Transfer From Horizontal and Inclined Two-Sided Bodies of Finite Thickness
Loading...
Authors
Manna', Rafiq
Date
Type
thesis
Language
eng
Keyword
Natural Convection , Two-Sided , Horizontal , Inclined , Non-flat , Numerical , Nanofluid , Finite Thickness
Alternative Title
Abstract
Natural convective heat transfer from two-sided flat plates that are horizontal or inclined to the horizontal has been numerically and experimentally investigated. The objective of the study was to investigate the influence of changes in the plate thickness, of the boundary condition over the plate side surface, of the plate shape, and of the inclination angle on the heat transfer rate. A further objective was to investigate whether the heat transfer rate from a flat plate can be increased by using a plate having a non-flat surface. The heated elements considered were exposed to air. The heat transfer rate was numerically obtained by using the commercial CFD solver ANSYS FLUENT© and experimentally determined using the lumped capacity method.
In addition, natural convective heat transfer from bottom-heated rectangular enclosures that contain a nanofluid and which have various aspect ratios was numerically studied. The purpose was to determine whether the heat transfer rate from the heated bottom wall of the enclosure can be increased compared to that which would exist with pure water and to study the influence of the nanofluid nanoparticle concentration and of the enclosure aspect ratio on the heat transfer rate.
The results of the studies of natural convective heat transfer from heated plates indicated that the plate thickness and the thermal boundary condition have only a modest influence on the heat transfer rate from the bottom surface of the plate. The influence of the inclination angle on the heat transfer rate from the top surface of the plate is higher than its influence on that from the bottom surface. For the case of the plate having a non-flat surface, the results indicated that the heat transfer rate can be enhanced by using a non-flat surface but this enhancement is relatively small.
The results of the study of heat transfer across a nanofluid filled enclosure showed that the heat transfer rate is significantly increased by replacing pure water with a nanofluid (Cu-water) and by increasing the nanoparticle concentration. It was also found that the enclosure aspect ratio had only a small influence on the heat transfer rate.
Description
Citation
Publisher
License
Queen's University's Thesis/Dissertation Non-Exclusive License for Deposit to QSpace and Library and Archives Canada
ProQuest PhD and Master's Theses International Dissemination Agreement
Intellectual Property Guidelines at Queen's University
Copying and Preserving Your Thesis
This publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner.
ProQuest PhD and Master's Theses International Dissemination Agreement
Intellectual Property Guidelines at Queen's University
Copying and Preserving Your Thesis
This publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner.