Technologies to improve power density of power electronic systems

dc.contributor.authorLiu, Wenboen
dc.contributor.departmentElectrical and Computer Engineeringen
dc.contributor.supervisorLiu, Yan-Fei's University at Kingstonen
dc.description.abstractAdvanced power electronic supplies with high power density are strongly demanded in a wide range of power levels. This thesis proposes high power density and thermal management solutions for three levels of power system integration: chip level for low power converters with 5W to 30W power ratings; power device level to decrease the component size; and power converter level including DC-DC converters and AC-DC converters range from 1kW to 6.6kW. High performance point of load converter structure is investigated for low power level compact module applications based on the power supply in inductor (PSI2) technology. This thesis proposes a 3D PSI2 integrated power module at 5V/8A output which reduces the size of POL module while maintaining a low junction temperature. Improved thermal modeling methodology is developed for integrated modules to achieve more accurate thermal analysis. In device level, a novel micro electromechanical system (MEMS) power relay which uses tiny MEMS switches is designed. The MEMS switch is used to replace the bulky magnetic – metal contact structure in traditional power relay solutions. Much lower on state resistance than solid state relay (SSR) is achieved, therefore less thermal issue is address due to lower conduction loss. Power density improvement and thermal design for discrete mid-level power converters from 1 to 20kW are studied and two high power density converters are proposed. The first implementation is a high current low voltage converter (with 14V/270A load) for electric vehicles (EVs). By building a multi-PCB cooling (MPC) cooling structure, the volume of converter is reduced by 31% while achieving the best heat dissipation performance. The second research is a single stage LLC AC-DC converter with PFC for on board charger (OBC) application. The LLC converter is proposed which combines the functions of power factor correction (PFC), DC-DC voltage regulation and galvanic isolation in only one stage. Bulky magnetic components are saved, and high power density is achieved by the proposed converter. In this thesis, multiple research methodologies including mathematical modeling, finite element analysis (FEA), SPICE based simulation and experimental test are employed to verify the proposals and theories.en
dc.relation.ispartofseriesCanadian thesesen
dc.rightsQueen's University's Thesis/Dissertation Non-Exclusive License for Deposit to QSpace and Library and Archives Canadaen
dc.rightsProQuest PhD and Master's Theses International Dissemination Agreementen
dc.rightsIntellectual Property Guidelines at Queen's Universityen
dc.rightsCopying and Preserving Your Thesisen
dc.rightsThis publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner.en
dc.subjectPower electronics, power density, thermal performanceen
dc.titleTechnologies to improve power density of power electronic systemsen
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
9.51 MB
Adobe Portable Document Format
Thesis document
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
2.6 KB
Item-specific license agreed upon to submission