An Investigation into the Leaching of Enargite Under Atmospheric Conditions

dc.contributor.authorGupta, Marken
dc.contributor.departmentMining Engineeringen
dc.contributor.supervisorPeacey, Johnen
dc.date2010-05-02 23:12:46.528
dc.date.accessioned2010-05-03T15:09:26Z
dc.date.available2010-05-03T15:09:26Z
dc.date.issued2010-05-03T15:09:26Z
dc.degree.grantorQueen's University at Kingstonen
dc.descriptionThesis (Master, Mining Engineering) -- Queen's University, 2010-05-02 23:12:46.528en
dc.description.abstractThe leaching behaviour of enargite was studied under atmospheric pressure. The kinetics of enargite dissolution appear to be extremely slow under the conditions studied using both small scale shake flasks and bench scale stirred tank reactors. An enargite concentrate and a purer mineral specimen were utilized and the effect of numerous variables including temperature, particle size, acidity, oxygen flow rate, iron addition, redox potential and pyrite addition were investigated. The initial rate of copper dissolution from enargite was relatively fast up to about 40% copper extraction but this was followed by a much slower dissolution rate. The first stage is thought to be reaction rate controlled while the latter stage appears to be diffusion controlled. The activation energy was determined to be 32 kJ/mol for the concentrate and 33 kJ/mol for the pure specimen in the temperature range of 55-85°C. In the presence of high concentrations of copper sulphate, enhanced copper recovery was observed for the pure enargite specimen. This could be the result of a change in the reaction product layer on the enargite surface and perhaps the formation of intermediate Cu2S. Previous work has shown that adding excess pyrite enhances copper extraction from enargite but these results could not be reproduced. Particle size reduction appears to be the most effective method to increase extraction rates, however only 70% copper recovery and 35% arsenic recovery was achieved after 24 hours of leaching at d80=2μm. At these reaction rates, it appears that enargite dissolution at atmospheric pressure will not be an economical process compared to other technologies such as high temperature/pressure oxidation or roasting.en
dc.description.degreeM.A.Sc.en
dc.identifier.urihttp://hdl.handle.net/1974/5665
dc.language.isoengen
dc.relation.ispartofseriesCanadian thesesen
dc.rightsThis publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner.en
dc.subjectEnargiteen
dc.subjectLeachingen
dc.titleAn Investigation into the Leaching of Enargite Under Atmospheric Conditionsen
dc.typethesisen
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Gupta_Mark_Z_201005_MASc.pdf
Size:
4.51 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.72 KB
Format:
Item-specific license agreed upon to submission
Description: