Show simple item record

dc.contributor.authorGeissler, Erik
dc.contributor.otherQueen's University (Kingston, Ont.). Theses (Queen's University (Kingston, Ont.))en
dc.date.accessioned2019-05-03T15:44:08Z
dc.date.available2019-05-03T15:44:08Z
dc.identifier.urihttp://hdl.handle.net/1974/26171
dc.description.abstractData centers have become the backbone of the global economy. The electricity demand for data centers grew tremendously over the last ten years. U.S. data centers consumed 91 billion kilowatt-hours of electricity in 2013 and are on track to consume 140 billion kilowatt-hours of electricity annually by 2020. AC – DC Rectifiers are the equipment to power the data centers. They convert the AC power from electric utilities into DC power with two power stages. The first stage is the PFC stage that converts the input 220V AC voltage into a 400V DC voltage. The second stage is the DC – DC stage that converts the 400V into 12V which is fed into the motherboard of the data center. Because of the huge electricity bill for the operating of data centers, very high efficiency AC – DC rectifiers are needed. Existing PFC AC – DC converters use MOSFETs as switching devices. Innovations in MOSFET switches over the last three decades have enabled a steady improvement in power supply design. However, the performance of the MOSFET has reached its theoretical limits. GaN switching technology offers significantly better performance than that of MOSFETs. It grants the opportunity to improve the power density and efficiency of power supplies. A Bridgeless Boost Totem-Pole PFC topology is selected and designed for maximum efficiency by utilizing GaN switches. Merits include: a custom wound inductor to aid in increasing overall efficiency, a detailed PCB layout for the GaN switches and their respective gate drivers, a high and low-side gate resistance analysis for the GaN switches to reduce the rise and fall time of the gate signals while mitigating the Miller Effect, current control of the synchronous MOSFETs to achieve ideal diode emulation, a soft-start function during the zero-crossings of the line voltage to reduce AC current spikes, a fast voltage control loop for better dynamic performance, and two heatsink designs to reduce GaN switch temperatures during high load operation. Mathematical analysis, simulation and hardware testing were done to verify the performance of the design. Start-up performance, dynamic step-load changes and steady-state performance via PF, THD and efficiency recordings over a range of loading conditions.en_US
dc.language.isoenen_US
dc.relation.ispartofseriesCanadian thesesen
dc.rightsQueen's University's Thesis/Dissertation Non-Exclusive License for Deposit to QSpace and Library and Archives Canadaen
dc.rightsProQuest PhD and Master's Theses International Dissemination Agreementen
dc.rightsIntellectual Property Guidelines at Queen's Universityen
dc.rightsCopying and Preserving Your Thesisen
dc.rightsThis publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner.en
dc.subjectPFCen_US
dc.subjectHigh Efficiencyen_US
dc.subjectAC-DC Converteren_US
dc.subjectGaNen_US
dc.subjectHEMTen_US
dc.subjectFast Voltage Loopen_US
dc.subjectAC Current Spikesen_US
dc.titleVery High Efficiency Bridgeless Boost Totem-Pole PFC using Gallium Nitride HEMTsen_US
dc.typethesisen
dc.description.degreeMaster of Applied Scienceen_US
dc.contributor.supervisorLiu, Yan-Fei
dc.contributor.departmentElectrical and Computer Engineeringen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record