Automated Detection of Helium Bubbles in Inconel X-750 and Modeling Their Effect on its Mechanical Properties
It is well known that the presence of pores has an effect on the mechanical properties of materials. A figure case is X-750, a Ni-based alloys exposed to neutron irradiation in nuclear reactors. Interactions with neutrons lead to atom transmutations that spontaneously create nanoscale pores in otherwise sound material. Imaging these nanoscale features using transmission electron microscopy is key to predicting and assessing the mechanical behavior of structural materials in nuclear reactors. Analyzing these micrographs is often a tedious and time-consuming manual process. It is a prime candidate for automation. A region-based convolutional neural network is adapted to detect helium bubbles in micrographs of neutron-irradiated Inconel X-750 reactor spacer springs. This neural network produces analyses of similar accuracy and reproducibility to that produced by humans. Further, this method is shown as being four orders of magnitude faster than manual analysis allowing for generation of significant quantities of data. The proposed method can be used with micrographs of different Fresnel contrasts and magnification levels. To understand the effect that these pores have on mechanical properties, a lattice element method is introduced. The lattice element method uses a spring network to act as forces between nodes to predict the micro-mechanical response of the system. This computationally efficient model shows promise in the application of porous material mechanical testing to fracture. A two-dimensional isotropic linear-elastic model is developed with multiple spring networks and boundary conditions. The lattice element method (LEM) is validated in all model conditions for isotropic behaviour and for size effects. The LEM is then validated in the case of a slab containing a circular pore. The LEM predicts stress concentrations in good agreement with an analytical solution. In the future, the detection network and the LEM, used in tandem, could enable the development of high-throughput simulated material models from experimental porous samples.
URI for this recordhttp://hdl.handle.net/1974/27875
Request an alternative formatIf you require this document in an alternate, accessible format, please contact the Queen's Adaptive Technology Centre
The following license files are associated with this item: